SP-102S – Solar helipad TLOF Light
Low-intensity, self-contained solar light, designed for temporary usage at heliports, helipads, and landing zone areas.
COMPLIANCE
- ICAO Annex 14 Vol. II (7th. Edition, July 2016)
- EASA CS-ADR-DSN
- FAA AC
KEY FEATURES
- High autonomy
- Fast solar charging
- High visibility
- 20 years lifespan
- Tested and certified
- Remote Radio Control (optional)
- 140 hrs of autonomy
SP-102S – Solar helipad FATO Light
Low-intensity, self-contained solar light, designed for temporary usage at heliports, helipads, and landing zone areas.
COMPLIANCE
- ICAO Annex 14 Vol. II (7th. Edition, July 2016)
- EASA CS-ADR-DSN
- FAA AC
KEY FEATURES
- High autonomy
- Fast solar charging
- High visibility
- 20 years lifespan
- Tested and certified
- Remote Radio Control (optional)
- 90 hrs of autonomy
This S4GA webinar is dedicated to the process of designing Solar Airfield Lighting in 4 simple steps. What these steps are and what kind of support S4GA provides – explained during the webinar by Mr Dmytro Kuczeruk.
An informative webinar for all AGL Designers, Airport Consultants, Airport Authorities, and other aviation professionals. You can learn more and find answers for questions such as:
- Why should I add a solar solution to my AGL design?
- How S4GA can support me in the RIBA stages?
- What is a FREE trial of S4GA solar system and how can I get it?
All these and even more questions were answered by the host of the webinar – Mr Dmytro Kuczeruk, S4GA Business Development Manager and expert in the aviation industry.
SP-102S – Solar runway Edge Light (LIRL)
Low intensity, omnidirectional optics; designed for permanent usage at airports located in regions without access to electricity and with high photovoltaic potential.
S4GA low-intensity runway edge light (LIRL) is an elevated airfield light, white (clear), remotely controlled (optional), and powered by solar energy.
COMPLIANCE
KEY FEATURES
- High autonomy
- Fast solar charging
- High visibility
- 20 years lifespan
- Tested and certified
- Remote Radio Control (optional)
Rubber Pad for Solar Helipad Lights
Rubber Pad is designed to firmly place SP-401S fixtures on any surface. This solution is equipped with holes to allow mounting the base with a solar panel.
Applicable for Different Surfaces
- asphalt/concrete surfaces
- grass/ground surfaces
Mobile Touchscreen with HLCMS System
Mobile Touchscreen with HLCMS allows remote control and monitoring of S4GA helipad lighting systems. Robust design and security options make S4GA Mobile Touchscreen the best fit solution for the most demanding customers – civil and military.
Key Features
- Capacitive multi-touch screen
- 4200 mAh Li-ion smart battery
- Integrated GPS
- Vibration & 6ft (1.8m) drop resistant
HLCMS for Helipads
S4GA HLCMS is a Helipad Lighting Control and Monitoring System designed to provide full remote control and monitoring of helipad lighting. S4GA HLCMS consists of Computer Interface integrated with UR-201 Control and Monitoring Unit. It features an open interface for integrating with the existing conventional helipad lights control system.
FEATURES
- Individual Light Status Display
- 1-6 Groups/Circuits Control (optionally up to 12)
- Up to 5-step Light Intensity Setup (optionally 6-steps)
- Operating Mode Setup (Visible/NVG/Remote/Autonomous)
Compliance
- ICAO Aerodrome Design Manual – Part 5 Electrical Systems / Chapter 10, clauses 10.1 – 10.12 & clause 10.14
-
ICAO Annex 14, Volume I – Electrical Systems Chapter 8, clauses 8.3.1 – 8.3.5
EASA CS ADR-DSN.S.890 – CS ADR-DSN.S.890 Monitoring, clauses (a), (b) & (d)
FAA AC 150/5345-56B – Specification for L-890 Airport Lighting Control and Monitoring System (ALCMS), clauses 3-7 & 9
Remote Handheld Controller for Helipad Lights
UR-101 Handheld Controller is designed to provide the User with the ability to remotely control the S4GA helipad lighting system
Compliance
Key Features
- Grouping of lights: up to 5 groups
- 3-step light intensity setup
- Operating modes setup
- Designed for hard operating conditions